DistributorSouthwire

Southwire

3/C CU 5KV 100% & 133% EPR/CPE RHINOPOWERTM Type MP-GC. MSHA Approved

Southwire #
SPEC47801

Class B Cu Conductors, Ethylene Propylene Rubber (EPR) 100% & 133% Insulation Level, Cu Tape Shield, Chlorinated Polyethylene (CPE) Jacket w/ Optional Reflective Stripes, 90°C

Priced by quote — copper moves daily (COMEX), so we quote at the current price.

Part numbers in this family (2) ↓

Available sizes & constructions

Cond. SizeConductor NumberCond. StrandsDiameter Over Conductor (in)(cm)Insulation Thickness (mils)(mm)Diameter Over Insulation (in)(cm)Ground Check SizeJacket Thickness (mils)(mm)Approx. OD (inches)(cm)Approx. Weight (lbs/1000')(kgs/km)
2/0 AWG2/0 AWG3319190.3760.96902.290.5831.48881102.791.7404.4226643964 57841099
250 KCMIL250 KCMIL2237370.5201.32902.290.7591.93881403.562.2905.8247787110 58701399
2/0 AWG2/0 AWG0.0810.120.1020.150.0220.030.0320.05910412.7720.852.83243243 57841099
250 KCMIL250 KCMIL0.0430.060.0560.080.0190.030.0300.041710775.6427.469.60355355 58701399

Part numbers in this family (2)

By size:
Southwire #DescriptionConstructionPackaging
578410992/0-19 CU 3/C EPR 2x3GW 1x8GC MP-GC RHINOPOWER 5KV 100% BLACK CPE JKT2/0 AWG 3C 19 STRCUT TO LENGTH REEL
58701399250-37 CU 3/C EPR 2x1/0GW 1x8GC MP-GC RHINOPOWER 5KV 100% BLACK CPE JKT250 KCMIL 3C 37SCUT TO LENGTH REEL

Application & features

RHINOPOWERTM Type MP-GC mine power feeder cable is a heavy-duty power cable for use in stationary horizontal HV mine power distribution circuits, for permanent or semi-portable applications with power transmission in deep mines, surface mines, open pits, tunnels, in conduit or duct (not to exceed max rated voltage), and suitable for direct burial in wet or dry locations. For vertical drop requirements consult with factory application specialist.

Standards & references

  • ASTM B3 Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • ASTM B496 Compact Round Concentric-lay-standard copper
  • ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines
  • MSHA Approved