CL4SS 14/8 PAIR STR CU CL4Z/CMG PVC-LS GREEN 1000 FT
- Southwire #
- CL4Z148N0605
Part of the family: Southwire CL4SS™ Class 4 Non-Shielded Outdoor / General Purpose
Priced by quote — copper moves daily (COMEX), so we quote at the current price.
Application & features
Intended for use in Fault Managed Power Systems (FMPS), remote powering, indoor Class 4 circuits per 2023 National Electrical Code (NEC) article 726. For use, primarily, in Agriculture, Intelligent Buildings, and Wireless Densification. The power source (transmitter) for Class 4 circuits shall be supplied from a power source that has a voltage output of 450 volts (peak or DC) or less. The CL4Z cables are considered for outdoor use only and are not to be attached to or used within a building structure. Type CL4Z cables comply with the applicable requirements for CL4. The CMG cables can be installed in buildings according to NEC article 722.135 and table 722.135(B).
Ratings:
Normal operating temperature: 90°C
Temperature Range: -40°C to 90°C
Rated Use: Dry or wet locations
Specifications
| Cond. Size | 14 AWG14 AWG |
|---|---|
| Conductor Number | 88 |
| Cond. Strands | 77 |
| Diameter Over Conductor | 0.070 inch0.18 cm |
| Insulation Thickness | 22 mils0.56 mm |
| Jacket Thickness | 37 mils0.94 mm |
| Approx. OD | 0.780 inch1.98 cm |
| Approx. Weight | 370 lbs/1000'551 kgs/km |
| DC Resistance at 25C | 2.631 ohms/1000'3.92 ohms/km |
| Min. Bend Radius | 2.6 inch6.60 cm |
Standards & references
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- UL 1400-2 Fault-Managed Power Systems - Part 2: Requirements for Cables
- UL 444 Communications Cables
- IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test