
![]()
2-7 3/C CU FR-XLPE E1 RIP CORD BLACK PVC JKT 600V SUBSTATION WIRE
- Southwire #
- 61952401
Type TC-ER Power Cable 600 or 1000 Volt Three Conductor Copper, Fire Retardant Cross-Linked Polyethylene (FR-XLPE) insulation XHHW-2 Polyvinyl Chloride (PVC) Jacket. Conductor Identification Method 1 Table 1
Part of the family: CU FRXLPE PVC CONTROL CABLE
Application & features
Southwire’s 600 or 1000 Volt Type TC-ER power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Only UL rated constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10.
Specifications
| No. of Conductors | 33 |
|---|---|
| Size | 2 AWG2 AWG |
| No. of Strands | 77 |
| Insulation Thickness | 45 mils1.14 mm |
| Nom. OD | 986 mils25.06 mm |
| Nominal Total Weight | 886 lbs/1000'1319 kgs/km |
Standards & references
- ASTM B3 Standard Specification for Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- UL 44 Thermoset-Insulated Wires and Cables
- UL 1277 Electrical Power and Control Tray Cables
- UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-58-679 Control Cable Conductor Identification Method 4
- ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- IEEE 1202 FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)