14-7 9/C CPRESS CU XHHW-2 1X#14 GG ARMOR-X MC-HL 600V BLACK PVC JACKET 5000 FT
- Southwire #
- 89061189
Type MC-HL Control Cable 600Volt Copper Conductors, Cross Linked Polyethylene (XLPE) Insulation XHHW-2 Continuous Corrugated Welded Armor ARMOR-X®, Polyvinyl Chloride (PVC) Jacket with 1 Insulated Green CU Ground
Part of the family: CU 600V XLPE Insulation ARMOR-X® PVC Jacket XHHW-2 Control Cable. CT Rated - Sunlight Resistant - For Direct Burial - Silicone Free
Priced by quote — copper moves daily (COMEX), so we quote at the current price.
Application & features
Southwire's 600 Volt Type MC-HL ARMOR-X® control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, 250°C for short circuit conditions, and -40°C for cold bend. For uses in Class I, II, and III, Division 1 and 2 hazardous locations per NEC Article 501, 502, and 503.
Specifications
| Cond. Size | 14 AWG14 AWG |
|---|---|
| Conductor Number | 99 |
| Cond. Strands | 77 |
| Insulation Thickness | 30 mils0.76 mm |
| Diameter Over Armor | 0.790 inch2.01 cm |
| Jacket Thickness | 50 mils1.27 mm |
| Approx. OD | 0.896 inch2.28 cm |
| Copper Weight | 127 lbs/1000'189 kgs/km |
| Approx. Weight | 352 lbs/1000'524 kgs/km |
| DC Resistance at 25C | 2.631 ohms/1000'3.92 ohms/km |
| AC Resistance at 75C | 3.170 ohms/1000'4.72 ohms/km |
| Min. Bend Radius | 6.3 inch16.00 cm |
| Allowable Ampacity Raceway 75C | 1414 |
| Allowable Ampacity Raceway 90C | 1717 |
Standards & references
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- UL 44 Thermoset-Insulated Wires and Cables
- UL 1569 Metal-Clad Cables
- UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
- UL 2225 Cables and Cable-Fittings For Use In Hazardous (Classified) Locations
- ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 2
- ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
- ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- IEEE 1202 FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)