1/C CU EPR CPE Medium Voltage Non-Shielded Jumper & Switchgear Cable
- Southwire #
- SPEC44031
Single Conductor Tinned Copper EPDM Insulation with a CPE Jacket Non-Shielded Jumper Cable
Priced by quote — copper moves daily (COMEX), so we quote at the current price.
Part numbers in this family (2) ↓Available sizes & constructions
| Cond. Size | Conductor Number | Cond. Strands | Diameter Over Conductor (in)(cm) | Insulation Thickness (mils)(mm) | Jacket Thickness (mils)(mm) | Approx. OD (inches)(cm) | Approx. Weight (lbs/1000')(kgs/km) | |
|---|---|---|---|---|---|---|---|---|
| 4/0 AWG4/0 AWG | 11 | 1919 | 0.5121.30 | 1754.45 | 802.03 | 1.0442.65 | 10161512 | 57978299 |
| 350 KCMIL350 KCMIL | 11 | 3737 | 0.6611.68 | 1754.45 | 802.03 | 1.1933.03 | 15122250 | 58579699 |
| 4/0 AWG4/0 AWG | 0.0510.08 | 0.0620.09 | 0.0410.06 | 1692767.48 | 5.213.21 | 230230 | 260260 | 57978299 |
| 350 KCMIL350 KCMIL | 0.0310.05 | 0.0390.06 | 0.0400.06 | 28001270.06 | 5.914.99 | 310310 | 350350 | 58579699 |
Part numbers in this family (2)
By size:
Application & features
Southwire’s medium voltage non-shielded cable is intended for use in substations installed on insulators and inside switchgear isolated from ground and where a non-shielded cable is desired. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C. See Table 2 for installation guidelines.
This cable is rated up to 40KV and is not UL listed. See Table 2 for Installation Guidelines
Standards & references
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire